How to Get Your Printer Online When It Says Offline
When a printer is offline, Windows is not able to communicate with it normally. First check the queue and the port: if Use Printer Offline is selected or the IP address changed, Windows can keep showing the printer as unavailable until you clear the queue or point it to the right address. This guide shows how to tell whether the problem is the queue, the port, the network, or the printer itself. It applies to Windows 10 and Windows 11. (Microsoft Support)
Quick diagnosis for offline printers
What you’ll need
- A Windows 10 or Windows 11 PC.
- The printer turned on and connected by USB, Ethernet, or Wi-Fi.
- Access to the printer’s control panel or status page, if it has one.
- Admin access on the PC for printer settings.
Printer offline decision table
Use the symptom pattern first. That tells you whether to clear the queue, fix the port, or check Wi-Fi and power-saving behavior before you change settings that are already correct.
| Connection type | Likely cause | First check | Escalation step |
|---|---|---|---|
| Wi-Fi printer | Printer IP address changed after a router restart or DHCP renewal | Compare the printer’s network report with the address in Windows | Recreate the port as Standard TCP/IP |
| Wi-Fi printer | A WSD port no longer matches the printer after a sleep or network change | Check whether the printer is using a WSD port in Printer properties | Switch to a Standard TCP/IP port |
| Any printer | Print queue is stuck or full | Open the queue and look for paused or failed jobs | Cancel all documents, then restart Print Spooler |
| Any printer | Use Printer Offline is turned on | Open the queue and check the Printer menu | Untick Use Printer Offline |
| USB printer on one PC only | Cable, port, or driver issue | Try a different USB port and check Device Manager | Remove and reinstall the printer driver |
| After sleep or power outage | Power-saving or discovery problem | Print a status page after the printer finishes restarting | Use a fixed IP address or wired Ethernet if the issue keeps returning |
How do you get the printer back online?
Start with the queue, then the printer’s connection, then the address. The fastest path is to clear any stuck job, untick Use Printer Offline, and restart both the printer and the PC. If the printer is still unavailable after that, check whether Windows is pointing to the wrong port or a changed IP address.
-
Power cycle the printer.
Turn it off, wait about 30 seconds, then turn it back on and wait until the printer finishes starting up. -
Open the queue.
Go to Settings > Bluetooth & devices > Printers & scanners, select the printer, then choose Open print queue. If you see Use Printer Offline under the Printer menu, untick it. -
Set the default printer.
In Settings > Bluetooth & devices > Printers & scanners, select the printer and choose Set as default. If Windows keeps changing it, turn off Windows-managed default printer behavior in the same area. -
Restart the spooler.
Open the Windows Services app, find Print Spooler, and restart it.
Why does your printer say offline?
The most common causes are a stuck queue, a wrong address or port, or a Wi-Fi change that broke discovery. The printer can be powered on and still appear unavailable in Windows if the queue is blocked, if the PC remembers an old IP address, or if a WSD port stopped responding after sleep or a router restart.

Queue or spooler problem
Say your printer shows offline only after a document stalls at 99 percent. That points to the queue first. A stuck job can block new jobs, and the Print Spooler service manages those jobs in Windows.
IP address or port mismatch
Suppose the printer worked yesterday, then went offline after the router rebooted. That often means Windows still points to the old printer IP address. If the port no longer matches the printer, Windows may not be able to reach it even though the printer is on.
Wi-Fi, sleep, or router change
Picture a printer that wakes up only after you press a button on the panel. That pattern fits discovery or power-saving trouble. A router restart or sleep state can interrupt the connection until the printer and PC re-establish communication.
How do you clear a stuck print queue?
Clear the queue when jobs are paused, failed, or piling up. If the queue refuses to empty, restart the Print Spooler service after you cancel the jobs.
Windows 10 queue path
-
Open the queue.
Go to Settings > Devices > Printers & scanners, select the printer, then choose Open queue. -
Cancel every job.
In the queue window, choose Printer > Cancel All Documents. If the menu is greyed out, close the window and reopen it after a short wait. -
Untick offline mode.
In the same queue window, open Printer and clear Use Printer Offline if it is selected.
Windows 11 queue path
-
Open printer settings.
Go to Settings > Bluetooth & devices > Printers & scanners, select the printer, then choose Open print queue. -
Clear the queue.
Use Printer > Cancel All Documents, then confirm the prompt. This removes blocked jobs that can keep the printer unavailable. -
Check offline mode.
If the printer still shows offline, return to Printer and untick Use Printer Offline.
Print Spooler restart
Use this when the queue will not clear or the offline state keeps returning after you cancel jobs. Restarting the service can clear stuck queue states.
How do you fix network and port mismatches?

Check this after the queue is clear. If Windows points to the wrong address or a WSD port that no longer tracks the printer, the device can stay unavailable even though it is powered on and connected. A Standard TCP/IP port is often the cleaner setup for repeated failures.
Check the printer IP address in Windows
-
Open printer properties.
Go to Settings > Bluetooth & devices > Printers & scanners, select the printer, then choose Printer properties. -
Check the Ports tab.
Look for the port address Windows is using. Compare it with the printer’s own network page or control-panel network report. -
Match the address.
If the numbers differ, Windows is pointing at the wrong printer IP address. That mismatch is a common cause after a router restart.
Switch from WSD to Standard TCP/IP
-
Open the ports list.
In Printer properties, open the Ports tab. -
Add a TCP/IP port.
Choose Add Port, then Standard TCP/IP Port. Enter the current printer IP address from the printer’s network page. -
Select the new port.
Return to the Ports tab and select the new Standard TCP/IP port, not the old WSD port.
When a fixed IP makes sense
Use a fixed IP address when the printer keeps going offline after restarts, sleep, or power outages. The address must fit your router subnet and avoid conflicts with other devices, so use the printer’s network settings or your router’s address management tools rather than guessing a number.
Common mistakes
- Unticking Use Printer Offline without clearing the queue first. The printer may stay blocked until the stuck job is removed.
- Changing the driver before checking the port. A wrong port can look like a bad driver.
- Assuming Wi-Fi is fine because the printer shows a signal icon. A printer can appear connected and still fail to respond to Windows.
- Using a fixed IP that conflicts with another device or falls outside the router’s range.
- Leaving Windows on a WSD port when the printer repeatedly stops responding after sleep or a router restart.
- For USB printers, checking only the network path. A USB-only printer that is unavailable on one PC needs cable, port, or driver checks instead.
Frequently asked questions
How do I get a printer back online when it says offline?
Open the queue in Settings > Bluetooth & devices > Printers & scanners, clear any jobs, and untick Use Printer Offline. If that fails, restart Print Spooler from the Windows Services app and check whether the printer’s IP address still matches the port Windows is using.
How do I get my printer off offline mode?
Open the printer’s queue and clear Use Printer Offline from the Printer menu. If the option is already off, cancel all documents and restart the queue through the Windows Services app. That order matters because a blocked job can keep the offline state in place.
Why does my printer say offline when it is online?
Windows can still show the printer as unavailable if the queue is stuck, if the printer IP address changed, or if the selected port no longer matches the device. A printer on Wi-Fi can look connected while Windows is still pointing to an old WSD or TCP/IP entry.
How do I clear a stuck print queue that keeps a printer offline?
Go to Settings > Bluetooth & devices > Printers & scanners, open the queue, and choose Printer > Cancel All Documents. If jobs remain, restart Print Spooler from the Windows Services app.
How do I check whether my printer is on the same Wi-Fi network as my device?
Print or open the printer’s network status page and compare the SSID with the Wi-Fi network on your PC. If the printer moved to a guest band, a different router, or a 2.4 GHz versus 5 GHz network, reconnect it to the same network name your device uses.
Should I use a fixed IP address if my printer keeps going offline?
Yes, if the printer repeatedly drops offline after router restarts or sleep. Use a fixed address that fits the subnet and does not conflict with other devices. Then create or edit a Standard TCP/IP port to match that address.
